-
挡圈钳, for external circlips on shafts
-
挡圈钳, for internal circlips in bore holes
-
Precision 挡圈钳, for external circlips on shafts
-
Precision 挡圈钳, for internal circlips in bore holes
-
Special Retaining Ring Pliers, for retaining rings on shafts
-
挡圈钳, for grip rings on shafts
-
挡圈钳, for large internal circlips
-
挡圈钳, for large external circlips
-
Circlip Tool, for internal and external circlips up to 1,000 mm nominal size
挡圈钳
来自mg冰球突破的夹簧钳
Install 内部环 and 外部环 safely and quickly
In vehicle and mechanical engineering, circlips are often used to fix bearings. 有两种类型: 内部环 用于钻孔和 外部环 用于轴上. To assemble and disassemble these quickly and safely, mg冰球突破 offers you a wide range of circlip tools.
The different tip shapes of our 挡圈钳 help you to react flexibly to different assembly situations. With a straight tip, you can guide the locking ring directly to the corresponding groove.
带卡圈钳 尖端倾斜45度或90度 enable the assembly and disassembly of circlips in difficult spaces, and they also make it easier to see into the work area because your hand and the pliers are positioned next to and not above one another.
There are special forms of circlips on the market. 这些还包括握环. These hold onto the shaft with pure gripping force and are therefore assembled or disassembled with a modified form of 外环用卡簧钳. The first choice for working with grip rings should be our 夹环钳.
最后但同样重要的 扣环钳 complete the range of 挡圈钳 从mg冰球突破. Retaining rings are a slim design version of circlips - they taper at the opening and are gripped there. 的特点 扣环钳: a narrow surface with a centered hole. 借助这个洞, the tips can be gripped safely and the ring can be moved to the intended location. For retaining rings with straight flanks in the separating slot, we again offer special pliers with a 波纹状，防滑外表面 that ensure that you have the expansion of the external ring under control at all times.
You see: No matter which pliers are required when installing or removing circlips: With 80 different 挡圈钳, mg冰球突破总是有答案的!
不同尺寸的夹簧钳
处理卷边时, one thing must be noted: The size of the ring and the size of the 挡圈钳 must always be coordinated. In order to give you the best possible orientation, the 允许的环直径为 打印在所有 挡圈钳 从mg冰球突破. As the thin working tips are sensitive to overloading, the largest possible pliers for the existing ring should always be used.
Speaking of large: With circlips over 140 mm in diameter, the actuating forces for one-hand pliers are too great. 轻量级的 双手 挡圈钳 help to move the rings to the right place with little effort and with the help of a special locking mechanism.
